DEBEL OXY CARE SYSTEM CONFIGURATION 1 TYPE B MANUFACTURED BY UFLOW AUTOM...

DEBEL OXY CARE SYSTEM CONFIGURATION 1 TYPE B MANUFACTURED BY UFLOW AUTOMATION

#DEBEL #DRDO #UFLOWAUTOMATION #DEBELOXYCARESYSTEM #COVID19

INSTALLATION & USER MANUAL DEBEL OXY CARE SYSTEM CONFIGURATION 1 TYPE B

UFLOW AUTOMATION

Ankur Industrial Complex, Survey No.:275/276, Plot No.:31,

Nr. Intol Cast Pvt. Ltd. Shapar (Veraval) 360 024.

Dist: Rajkot Gujarat (INDIA).

For Maintenance & Service: +91 75758 68662

Email: sales@uflowvalve.com | Website: www.uflowvalve.com

Video Link:

https://youtu.be/n3qelueer8o

01) Oxycare Description

Oxycare is a device that releases the compressed oxygen gas to the user as per a predefined setting through an oxygen mask or nasal prongs. The flow rate is manually adjustable from 0 to 15 lpm, with the help of the Flow Regulator knob.

02) Technical Details

Media: Medical Oxygen (O2)

Inlet Pressure: Up to 150 bar

Flow Range: 0 - 15 lpm

Body Material: Aluminum anodize

Nominal Outlet Pressure 0-60 psi

Inlet Connection: G5/8” BSP

Filter: 40 micron

Dial: Plastic white, black lettering

Operating Temperature: -10°C to 60°C

Sealing Material: Viton

Dial Size: 50mm

Flow Setting: 12 Steps (including zero position)

Design Standard: IS/ISO 10524-1:2018

03) Storage of Oxycare

On receipt, check the regulator or ensure that it is in fully assembled condition.  The regulator should be stored above the ground level or rack. Do not apply tar, paint, grease, or any other material inside the regulator as this could impair the performance of the regulator.

04) How to Install Oxycare

STEP - 1

Place the Oxycare regulator inlet steam nozzle with the matching threaded port seated above the

cylinder’s neck, and fasten the plastic handwheel found on the Oxycare regulator by turning in a clockwise direction. 

STEP - 2

Fill up the humidifier bottle with distilled water up to the maximum level marked over it.  Watch out for water levels at periodical intervals. If the level falls below the minimum mark then refill it again with distilled water only. Connect the humidifier bottle to the oxygen outlet on the regulator.

STEP - 3

Connect the oxygen mask tubing to the outlet of the humidifier bottle.

NOTE: The oxygen tube should slip comfortably onto the humidifier outlet.

STEP - 4

Slowly and carefully turn the valve on the top of the cylinder stem counterclockwise until you see the contents gauge register pressure. Full

tanks should be around 2000 PSI.

(As described in “Diagram - D”)

CAUTION: If the cylinder hisses loudly, turn the

valve OFF, and repeat the above step.

STEP - 5

Set the oxygen flow as prescribed by using the flow control knob.

NOTE: Twist knob to turn and adjust proper prescribed flow.

05) How to Uninstall Oxycare

STEP - 1

Turn the cylinder valve off by turning it in a clockwise direction. After the pressure has dropped to zero, turn the flow control to OFF or the “0” position. 

STEP - 2

You may now change the cylinder by loosening the plastic hand wheel on the oxycare Regulator and remove the regulator. Follow steps1-5 above for reconnecting to a cylinder.

CAUTION

DO NOT attempt to repair the Regulator.

DO NOT apply/immerse the Regulator in any kind of liquid. This will void the warranty.

Tags:

studyiq,study iq,study iq current affairs,may current affairs 2021,drdo oxycare system,drdo oxycare systems,oxycare systems developed by drdo,drdo,oxycare system,pm cares fund,covid-19,oxygen,drdo news,oxygen generator,o2 production,oxygen concentrator,oxygen cylinder,drdo oxycare,covid cases in india,oxygen supply,oxygen deficency,oxygen delivery system,drdo tejas oxygen technology,what is oxycare system?,how oxycare system work?,oxygen shortage, studyiq,study iq,study iq current affairs,april current affairs 2021,supplemental oxygen delivery system,types of supplemental oxygen delivery,how is supplemental oxygen delivered,supplemental oxygen delivery methods,method of oxygen therapy,oxygen administration,oxygen delivery system,nonrebreather mask,oxygen cylinder,drdo,oxygen supply,oxygen deficency,oxygen therapy devices,low flow,low flow oxygen therapy,oxygen therapy understanding, DEBEL OXY CARE SYSTEM CONFIGURATION 1 TYPE B MANUFACTURED BY UFLOW AUTOMATION, uflow automation, 

To subscribe to my channel and you don't miss it...

Follow our Official Social Media pages @techsuvichar

Website - https://techsuvichar.com/

Facebook - https://www.facebook.com/tecno.suvichar.5/

Twitter - https://twitter.com/TechSuvichar

Linked In - https://www.linkedin.com/in/tech-suvichar-a114641b7/

Instagram - https://www.instagram.com/techsuvichar/

Dribble - https://dribbble.com/TechSuvichar

Reddit - https://www.reddit.com/user/techsuvichar

Pinterest - https://in.pinterest.com/techsuvichar/

Tumblr - https://www.tumblr.com/blog/techsuvichar

Youtube - https://www.youtube.com/c/TechSuvichar

Anchor - https://anchor.fm/tech-suvichar

Fiverr - https://www.fiverr.com/techsuvichar?up_rollout=true

Blogger - https://www.techsuvichar.blogspot.com